Tech Support Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
i ahve a kenwood kdc 4022/422 stereo and i purchased a wire harness for my nissan altima i have the ground wire hooked up to the harness but there is a p. cont wire from the radio and on the harness is an amp wire with an additional amp ground do i need to hook these in is this for an internal amp and the additional amp ground do i hook that into the chasis ground
 

· Registered
Joined
·
1,696 Posts
Are you sure its a ground and not a turn on lead? Why would there be an amp ground on an after market harness? Makes no sense.......... Please reword the question more clear for a better answer.
 

· Registered
Joined
·
1,240 Posts
Radio 12v yellow/green + radio harness
Radio Ground (chassis)
Radio Ignition purple + radio harness
Radio Illumination red/blue + radio harness
Factory Amp Turn-on green/white + radio harness
Power Antenna green + radio harness
LF Speaker +/- blue/white - blue/red +,- radio harness or amp under rear deck
RF Speaker +/- white/black - blue/black +,- radio harness or amp under rear deck
LR Speaker +/- green/yellow - black/yellow +,- radio harness or amp under rear deck
RR Speaker +/- blue - red +,- radio harness or amp under rear deck
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top