Tech Support Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
hi all, can anyone help me with an upgrade problem
i have 3 slots with 64mb each in slots 1&2-i require 256 total so i installed 128 strip in slot3-pc only recognised 128! i put the new strip
in slot1 & now the pc says i have192! any ideas please? tia ian
 

·
hey
Joined
·
10,189 Posts
Ok, take the 128 meg and stick it in the first slot. If it counts up to 128 shutdown the computer and stick a 64meg in the next slot. I should come up with 192. If it does go ahead and stick the next chip in, you should have the 256. If not try switching the last two memory sticks around. If it still says 192 then you might have a bad memory slot.

hi all, can anyone help me with an upgrade problem
i have 3 slots with 64mb each in slots 1&2-i require 256 total so i installed 128 strip in slot3-pc only recognised 128! i put the new strip
in slot1 & now the pc says i have192! any ideas please? tia ian
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top