Tech Support banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I installed an SSD to my computer, didn't plug it into the booting SATA port, as I needed to clone my HDD onto it etc. etc. before I could boot with it. But when I tried booting with it connected, the lights came on, the fans came on, seems okay, but it doesn't boot. Not even the first screen, the monitor doesn't seem to connect but it was fine before.
I tried disconnecting the SSD to make it as before but same problem. Any ideas?
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
Yeah. If I could just access BIOS it would be fine, but there's nothing. Screen is just idle (tried multiple and different cables), and the tower just sits there humming away.
 

·
Moderator , Windows Tech Team , Hardware Tech T
Joined
·
2,979 Posts
Unplug all cables, power and all, once done press the power button and release flea power from the caps, then connect only the essentials (mobo, psu, cpu, ram) together and see what happens.
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top