Tech Support banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter #1 (Edited)
ok, my system has a asus k8vse delux MOBO the original hd is a segate sata 80gb. i bought a IDE maxtor 200gb and i want to use it as a slave. Raide 0+1 preferably. although i cant seem to get it recognized by the bios or anything else. can anyone help?

the mobo has a Raide ata connecter that supports IDE drives.
 

·
Registered
Joined
·
25,116 Posts
Welcome to TSF:

You must install the raid drivers (from your mobo website specifically for your mobo) / review the manual there are also raid set-up guides you must follow to config your raid set-up

you will need to enable the raid controller in the bios and verifry it shows up in the device manager

dont hesitate to ask more questions after you have throughly reviewed your mobo manual / also do a search from within this forum / our raid guru Clintfanhas an excellent set-up guide with super step by step instruction / very well written



regards

joe
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top