[hunter92]

Obsolete part and no after market? for my 1996 k2500 chevy suburban 7.4 liter 454.
Can't find used either.
It is part number 1024-2490 or 214-180. A secondary air injection/intake tube for passenger side. Any suggestions!
It is an s shaper pipe that sits on top of the valve covers on each side. I need passenger side.
I can post a pic if needed. Any help would be appreciated!

 

[SABL]

Pic would be nice.

You're pretty much getting into a 'classic' vehicle at 20 years old. Parts will be quite scarce if they were only used on limited years.

 

[Wrench97]

Take a look at this older one perhaps you can make it work?
Secondary Air Injection Pipe Right Standard AT160 | eBay

 

[hunter92]

Thank you so much for your reply. It's actually an emissions item. And yes in between classic and not. No luck at auto salvage either . It's the aluminum pipe that sits over the valve covers. Any input is appreciated .

 

[Wrench97]

That's a stainless steel pipe, depending on where/how it's broken it may be welded.

 

[hunter92]

Thank you that's a good alternative.