okay so what is the model number of the PC or motherboard? you probably need device drivers for your network adapters
I have a compaq presario sr2010nxokay so what is the model number of the PC or motherboard? you probably need device drivers for your network adapters
I just finished installing the chipset driver. All the errors in yellow are and what i found in the details id:Please do this:
Open the Device Manager
Post ALL errors you may have (yellow!)
Right click on the error>Properties>Details Tab
Post the info you find under Device Instance ID
Do this for each error you have
Did you install the chipset driver from the link (under Original Drivers) that simpswr posted?
Bill
Thanks I managed to get a local connection. Now I need to get a wireless one. I know I need a network adapter which I do know I have, but in device manager it doesnt seem to show up. Like I said two years ago I could connect to wireless just fine4 so I know its there.Now that the Chipset driver is loaded, the others should load ok.
I still see the audio and the network controller with a yellow mark. and i opened up my motherboard,saw my network adapter card, went to the site, downloaded the driver but when i run it, it goes on then goes off.You now have no devices with a yellow ! or reported as unknown?
That desktop likely did not come with onboard wireless . . you could open it and look at the adaptor to see what Brand and Model it is
is probably the wireless adaptor.network controller with a yellow mark
I have a Belkin Wireless G Network Card Driver v2 and for your second question i think it is the manufacturers program.is probably the wireless adaptor.
What Brand and Model is it? Are you using Windows Zero COnfiguration to manage the connection or the manufacturers program?
Tried everything their. After right clicking on Network Controller it says it was missing drivers and when I try to install it, it says I need an internet connection when I do not have one.The WZC will usually work better than the manufacturers program . . try using that.
Go to Services and set Wireless Zero Configuration to auto and start the service. Then set the network adaptor to use Windows to manage the connectio0n
![]()
See this for more troubleshooting steps:
http://support.microsoft.com/kb/870702
When I tried to right click-Update Driver it couldnt find the neccessary files. And the file I downloaded goes on then turns off when I try to run the programDon't you have a wired connection? . . Don't install the drivers by right clicking on the adaptro in Device Manager . . run the driver file you downloaded