[pyrodude333]

to start off i have no video at all, i can't see anything on the screen.
im trying to change the video in the bios, from agp to pci without any picture.
i need key by key steps to change that please.

 

[Tyree]

Remove the PCI graphics card. Boot the PC using the Onboard Graphics and uninstall the Onboard Graphics drivers. Shut down the PC, install the PCI graphics card, boot into the Bios and make the change to PCI.

 

[pyrodude333]

thanx for the quick reply but i can't see anything.
i hit F1 to go into setup but i cant see anything to change the "video" from AGP to PCI. i need step by step instructions please.

 

[pyrodude333]

ok here is what i know.
i think the onboard graphic card ,that is attached to the motherboard, crashed.
so the pc cant show the video on the monitor.
i want to go into the bios and change the video to the PCI graphics card that i plugged into the pc.
i know that when the pc is booting to press F1, but since i cant see the display i dont know how to get to the part to change the video.

if someone has a HP Pavilion 1020n, can you boot into the bios (setup) and tell me how to navigate key by key to the video section.