Tech Support Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hello, I have a honda gx160 engine that powers a pressure washer. I damaged the crank case trying to get the pump off to replace it. While putting on the new crank case cover I pulled the timing gear out!! Since then I cannot get the thing to fire. I've lined up the marks on the cam gear and the main gear but to know avail. Is there a trick to this? what am I doing wrong? Any help would be appreciated. Thanks!:4-dontkno
 

·
Registered
Joined
·
392 Posts
Hello, I have a honda gx160 engine that powers a pressure washer. I damaged the crank case trying to get the pump off to replace it. While putting on the new crank case cover I pulled the timing gear out!! Since then I cannot get the thing to fire. I've lined up the marks on the cam gear and the main gear but to know avail. Is there a trick to this? what am I doing wrong? Any help would be appreciated. Thanks!:4-dontkno
Do you mean the ignition no longer works or you can't get the engine to run again?
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top