Tech Support Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

· Registered
Joined
·
2 Posts
Follow Up Question

I have just joined this forum from a google search hit. I hope that I am continuing a post in the same thread.

I am considering purchasing a PC4800-E and intend to use just a single ATA133 hard drive.

From other postings, I gather that it is just not worth the effort of trying to use the RAID Controller in IDE mode just in order to squeeze out the ATA133 instead of the standard ATA100.

Nonetheless, the answers given so far don't quite answer my question. If I did want to do it, then I would be starting with no other hard drive except for an unformatted single 80Gb hard drive.

I understand that there is the Fastrack 378ATA driver that can be installed, but without an existing hard drive or XP installation to start with, how would I go about getting that single unformatted 80Gb HD connected in the RAID Controller's ATA133 and installed with XP?
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top