Tech Support banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hello just got a ASRock K7S41 mother board to replace a friends dead mother board but it needs jumpers setting for the FSB and dont know what to set them on. 200mhz 266mhz 333mhz or 400mhz it will have ddr 400 ram and cpu is AMD Athlon 2000 i think .. id i can see on chip in gold is 27493 and a white sticker with 500101965429s can anybody tell me what to set FSB jumpers to
thanks
colin
 

·
OmegaDawn
Joined
·
781 Posts
Set the jumper for 133Mhz for the cpu.
Depending on the board,you can set the memory frequency in the BIOS
up to 200Mhz.
Just set the memory to SPD and it will auto detect.
133Mhz doubled would be 266Mhz if the board is marked that way.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top