Tech Support banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have a P4 2.4GHZ 533FSB CPU, the temp is always at high 40s under cold boot, and it stays at 50s after 30mins, I wonder if there is anything wrong with the HS and fan? I'm pretty positive that I have installed it correctly, should I go get a thermaltake cooler or is there anything I can do to solve this problem, thanks for the help.
 

·
Citizen of the world
Joined
·
51,041 Posts
Personally, I don't believe that running around 50C is a problem, that's the way it works. If it doesn't climb significantly, I'd stop worrying about it and do some computing. :)
 

·
Registered
Joined
·
3 Posts
GO 450! AT 55 odd degrees c! GO 450! Work your stuff!

Winning
 

·
Registered
Joined
·
2 Posts
Discussion Starter #4
johnwill said:
Personally, I don't believe that running around 50C is a problem, that's the way it works. If it doesn't climb significantly, I'd stop worrying about it and do some computing. :)
But I was told the normal operating temp for P4 chips is at high 30sm wouldn't my cpu tem be too high then?
 

·
Registered
Joined
·
1,481 Posts
Installed a P4 1.9 on an INTEL Mother board...my montioring software was going nuts...running hot all the time...I leave my system on 24/7...went out spent $20 on a PCI fan....runs 10 to 15 cooler...alarms stopped going off...


answer..if your power supply can take it add a fan...if it cant get a new power supply and fan :winkgrin:
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top