Tech Support Forum banner
Status
Not open for further replies.
1 - 18 of 18 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
Hi, I built my computer In may and for about a week now i have stated getting the BSOD.

My specs:
Mother Board: GIGABYTE GA-MA790X-UD4P
Processor: AMD Phenom II X4 940 3.00 GHz
Video Card: EVGA GeForce GTX 285 1 gig
PSU: Cooler Master UCP 900W
RAM: Corsair Dominator 4GB 2x2GB DDR2
Hard Drive: Western Digital Caviar Black WD5001AALS 500GB
OS: Windows 7 Ultimate

I really have no idea what the problem can be, could any of the hardware be incompatible with each other?
 

·
Registered
Joined
·
10 Posts
Discussion Starter · #2 ·
I am starting to think I have two bad stick of ram, when ever both are in it will crash out of no where, but when I take one stick out it seems to go alot longer with out crashing.
 

·
Enthusiast
Joined
·
16,762 Posts
you need to right click on my computer > advanced > start up and recovery and uncheck automatic restart.

when you get the BSOD the computer will just stay at the blue screen and you can note down the error code and post it here.

Alternativley you can do righ click my computer > manage > event viewer > and click on system you should see either yellow warning signs when the error occurred or a red x. If you click on the error it should show you the code but it may not be in full so the first option is the best.
 

·
Registered
Joined
·
10 Posts
Discussion Starter · #9 ·
So I went into event viewer and there are several red x's which i assume represent each time the system has crashed. This is one of the error messages.

- System

- Provider

[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

EventID 41

Version 2

Level 1

Task 63

Opcode 0

Keywords 0x8000000000000002

- TimeCreated

[ SystemTime] 2009-12-02T01:25:53.981620000Z

EventRecordID 7469

Correlation

- Execution

[ ProcessID] 4
[ ThreadID] 8

Channel System

Computer Ryan-PC

- Security

[ UserID] S-1-5-18


- EventData

BugcheckCode 127
BugcheckParameter1 0x8
BugcheckParameter2 0x80050031
BugcheckParameter3 0x6f8
BugcheckParameter4 0xfffff880015b4bf4
SleepInProgress false
PowerButtonTimestamp 0


Is this the right kind of code?
 

·
Enthusiast
Joined
·
16,762 Posts
I have had a scout around on google. It seems that you may have to update the firmware for your hard drive (from the hard drive manufacturer) and you have to update all of the drivers for everything else you use such as sound card etc
 
1 - 18 of 18 Posts
Status
Not open for further replies.
Top