Tech Support banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter #1
i changed my cpu fsb from 100 to 132 becuase my freind advised me to and now when i turn the computer on i hear the computer making noise like normal spinning fans and ect but annot see anything on screen what do i do to reset the bios because i cant see anything on screen please help!!
 

·
Registered
Joined
·
25,111 Posts
Hi,

You need to clear the CMOS. That is done one of the following ways:

1) Remove the battery for about ten minutes and then put it back exactly the way it came out. Boot up and away you go.

2) There is a CMOS clear jumper on the board (see manual). One just moves this little jumper from pins 1 and 2 to the postiion of 2 and 3. Leave it that way for ten minutes, then return it to pins 1 and 2. That does it. Boot up and away you go.

Let us know if we can help further.
 

·
Registered
Joined
·
25,111 Posts
gizmo_118 said:
thanks for that i took out the battery and now it works. silly me messing around in bios
Hi,

Don't be too hard on yourself, that is the way you learn. Anyhow, glad you got it going and I could help you. See you around the forum.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top