Tech Support Forum banner
Status
Not open for further replies.
1 - 8 of 8 Posts

·
Registered
Joined
·
173 Posts
Discussion Starter · #1 ·
I had a motherboared that does not work because of blown capacitors. I ordered a new motherboared from this website. What I need to know is how to get the heatsink and processor off the old motherboared and put it on the new one. Thank you for your help
 

·
Registered
Joined
·
9 Posts
ok, have you removed the MB from the case? it's easier to remove the heatsink with the MD out of the case. Disconnect all power cables, ide cables, floppy cables and any other cable connected to the MB. If you already have it out or do not want to remove it, look for two clips on opposite sides of the heatsink. Try unclasping them and removing the heatsink.
 
1 - 8 of 8 Posts
Status
Not open for further replies.
Top