Tech Support banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
I am unable to boot from one of my hard drives (previously worked fine)
Also on the start up screen it shows this drive as 2 Gig instead of 4 Gig
However there is 4 Gig available on the drive after booting from another.
Is there a command checkboot or fixboot.

233 mhz mmx
128 meg
old as hell but working well
I have a setup where I used to be able to boot from either drive
by changing from c to d in bios there is a double jumper setup on the drives.
 
P

·
Guest
Joined
·
0 Posts
Did this HD worked fine on this motherboard before ? I would flash the BIOS asap.
 

·
Registered
Joined
·
2,163 Posts
I am a little confused you said:
by changing from c to d in bios there is a double jumper setup on the drives
This indicates there are two hard drives in your system.
and then you said:
Also on the start up screen it shows this drive as 2 Gig instead of 4 Gig
However there is 4 Gig available on the drive after booting from another
Correct me if im wrong you have two hard drives and one is a 4 gig.
In my computer right click on the drive and under the tools tab check the drive for erroes click the check now button. Have it fix all errors automatically.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top