Tech Support banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
I've upgraded my motherboard to a new Gigabyte 7VT600P-RZ and am trying to install a new Hightech ATI Radeon 9250 128MB 64bit graphics card.
All I get is a note on my screen that there is no signal!
Does anyone know if these components are compatible? It works ok with an old Hercules 3D Prophet II GTS Pro 64MB card, and the new card works in another computer.

If this card is not suitable for this mobo can anyone recommend an alternative. It does not have to be suitable for gaming.

System details:
Gigabyte 7VT600P-RZ
AMD Athlon 1200MB
RAM 512MB
HDD 80GB
DVD-ROM
CDRW
FDD
WIN XP Pro SP2
PSU 500W

Thanks in advance
Jandss
 

·
Registered
Joined
·
2,163 Posts
Looking at the manuals for both There is no reason it should't work. :4-dontkno
jisc123 has a good idea. make sure the card is firmly installed. :sayyes:
 

·
Registered
Joined
·
5 Posts
Discussion Starter · #4 ·
Graphics card problem

Thanks for the help.
It turned out to be a bad connection. The card fitted into the AGP slot ok but when I fixed it to the case it strained it out of place so I did a bit of minor alteration and it now works fine.

Jandss
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top