After a problem with the power getting to the motherboard, my system seems to be working fine.
HARDWARE SETUP:
Motherboard: ASUS P4C800-E Deluxe
CPU: Pentium 4 3.2 GHz HT-enabled 800MHz FSB
Cooler: Stock Intel
Memory: amnt & part# 2x512 Kingston KVR400X64C3A/512 PC3200
Video: ATI Radeon 9800PRO
Case: Antec Sonata
Power supply: Antex 380W TruePower (included with Sonata case)
CD Writer: N/A
DVD Writer: Pioneer DVR-A06U
Floppy: included in Y-E Data 7-in-1 Floppy/Card Reader
HDD 1: WD 120GB 7200 RPM
HDD 2: WD 250GB 7200 RPM
Sound: SoundBlaster Audigy2 ZS
LAN: On-board
SCSI adapter: None
Video capture: None
Keyboard: Logitech Elite Keyboard
Mouse: Logitech MV310
Network:
Other:
HARDWARE Connections:
PCI slots: 1=empty, 2=Audigy, 3=empty, 4=empty, 5=empty.
Pri IDE: WD 120GB
Sec IDE: DVD
SATA1: n/c
SATA2: n/c
SATA RAID1: n/c
SATA RAID2: n/c
Pri RAID: n/c
Fans: 120mm fan built into Sonata case
Front panel USB and Firewire ports wired to motherboard
BIOS Setup:
10.11, No major customizations
SOFTWARE Setup:
Nothing unusual
PURPOSE:
Digital video editing, multimedia, some gaming
COMMENTS:
PROBLEM SUMMARY:
1. Had problem where the LEDs would blink when the case was turned on. Turned out to be a loose wire in the power supply. Replaced that, and eveything seems to be working fine.
HARDWARE SETUP:
Motherboard: ASUS P4C800-E Deluxe
CPU: Pentium 4 3.2 GHz HT-enabled 800MHz FSB
Cooler: Stock Intel
Memory: amnt & part# 2x512 Kingston KVR400X64C3A/512 PC3200
Video: ATI Radeon 9800PRO
Case: Antec Sonata
Power supply: Antex 380W TruePower (included with Sonata case)
CD Writer: N/A
DVD Writer: Pioneer DVR-A06U
Floppy: included in Y-E Data 7-in-1 Floppy/Card Reader
HDD 1: WD 120GB 7200 RPM
HDD 2: WD 250GB 7200 RPM
Sound: SoundBlaster Audigy2 ZS
LAN: On-board
SCSI adapter: None
Video capture: None
Keyboard: Logitech Elite Keyboard
Mouse: Logitech MV310
Network:
Other:
HARDWARE Connections:
PCI slots: 1=empty, 2=Audigy, 3=empty, 4=empty, 5=empty.
Pri IDE: WD 120GB
Sec IDE: DVD
SATA1: n/c
SATA2: n/c
SATA RAID1: n/c
SATA RAID2: n/c
Pri RAID: n/c
Fans: 120mm fan built into Sonata case
Front panel USB and Firewire ports wired to motherboard
BIOS Setup:
10.11, No major customizations
SOFTWARE Setup:
Nothing unusual
PURPOSE:
Digital video editing, multimedia, some gaming
COMMENTS:
PROBLEM SUMMARY:
1. Had problem where the LEDs would blink when the case was turned on. Turned out to be a loose wire in the power supply. Replaced that, and eveything seems to be working fine.
