Tech Support Forum banner

Geforce 4.6ti...dead or alive? ARGH!

1325 Views 2 Replies 2 Participants Last post by  Molag
Just finished building my system...settings in bios/jumpers and all ARE correct...winXPro just installed....now I start installing the drivers...nvidia drivers 44.03 installed....reboot...boots up fine...screen starts showing visual artifacts...everything is processing just fine accept for the visual data...the funny thing is that before I installed the drivers it worked perfect....I tried every supported driver for the card but nothing seems to work...I lost the receipt...funding is gone...HELP!
Status
Not open for further replies.
1 - 3 of 3 Posts
Do you have any known working cards to test in your machine?

Also, is the card firmly seated in the slot?
Its funny, i had to underclock from 300mhz x 600mhz to 300mhz x 300mhz.
For some reason, on my soyo kt400 dragon, it likes to cook my chaintech ge60(geforce 4 4600) - its odd because my pal has the same card running in his wintel and he don't have a single problem with it...

bah,
kt400=Magic video card Cooker 400f+! :brush:
1 - 3 of 3 Posts
Status
Not open for further replies.
Top