Tech Support Forum banner
Status
Not open for further replies.
1 - 3 of 7 Posts

· Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
Hi. I built my system about 3 weeks ago, so all the components should be relatively new. The problem today was that when I went to boot up my computer, the POST and BIOS were fuzzy. There are lines running across the screen, but everything is still readable. Once I reach windows however, there are no problems at all with the display. Is this a problem with the bios, video card, or monitor? or something else entirely?

Thanks for the help!

System Info
Mobo: ASUS M5A97
CPU: AMD Phenom II x4 830 2.8Ghz
PSU: Corsair CX600 600W
Graphics: XFX Radeon HD 6770 1Gb
Operating System: Windows Vista Home Premium 32bit
Mem: Kingston 4gb RAM
 

· Registered
Joined
·
9 Posts
Discussion Starter · #3 ·
Yes I think it's set to auto. I'm just really confused since it was fine all the other times I've booted my computer.

Edit: Okay. Now I've found an additional issue. I tried running a few games to see if they were affected too. I ran Skyrim in full resolution and high settings and everything was fine. When I tried Crysis on similar settings, I got the same fuzzy screen look only in fullscreen. In windowed mode, it was okay.
 

· Registered
Joined
·
9 Posts
Discussion Starter · #5 ·
Not on hand. I'll borrow my friend's computer in a couple days to swap parts.

I haven't updated any drivers since I built the computer.

How would a PSU affect the display?

Thanks for the help so far, btw.
 
1 - 3 of 7 Posts
Status
Not open for further replies.
Top