Tech Support Forum banner
Status
Not open for further replies.
1 - 3 of 5 Posts

· Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
I just built my own computer and everything is working fine, except that it cant detect the system disk i made. The floppy drive is working(or at least the light is on). Also, on startup, it says "detecting"[then a little time passes] and then it says that my bios is not installed because there are no drives attached to it. I"m not sure what that means.
plz help
 

· Registered
Joined
·
4 Posts
Discussion Starter · #3 ·
Well, i think everthing is connected correctly. The dvd-rom light comes on, and the floppy light, and the hdd light turns on. There arent' any beeps and i have the IDE detection on auto.
 

· Registered
Joined
·
4 Posts
Discussion Starter · #5 ·
The lights cycle off like normal. And on the bios screen it says that it detects the hard drive on the primary master and the dvd on the secondary slave(i need to change that).
 
1 - 3 of 5 Posts
Status
Not open for further replies.
Top