Joined
·
1 Posts
I can't make my video card work agp8x!
Although I enabled agp 8x support from bios 3dmark03 system details says: "support 4x and 8x, 4x enabled"
I upgraded the bios with the latest ("leadtek uk" advised so but didn't help).
I can't figure out the problem, can anybody help?
System and driver details:
SiSoftware Sandra
Processor
Model : AMD Athlon(tm) XP 2400+
Speed : 2.01GHz
Model Number : 2400 (estimated)
Performance Rating : PR2920 (estimated)
Type : Standard
L2 On-board Cache : 256kB ECC Synchronous Write-Back
Mainboard
Bus(es) : ISA AGP PCI USB FireWire/1394 i2c/SMBus
MP Support : No
MP APIC : No
System BIOS : Phoenix Technologies, LTD 6.00 PG
Mainboard : nVidia-nForce
Total Memory : 255MB
Chipset 1
Model : Nvidia Corp nForce2 AGP Controller
Front Side Bus Speed : 2x 168MHz (336MHz data rate)
Video System
Monitor/Panel : FLATRON 795FT PLUS/SUPER
Adapter : NVIDIA GeForce4 Ti 4200 with AGP8X [NV28.2]
Adapter : NVIDIA GeForce4 Ti 4200 with AGP8X
Operating System(s)
Windows System : Microsoft Windows XP Professional Version 5.01.2600
SiSoftware Sandra
Video Adapter
Model : NVIDIA GeForce4 Ti 4200 with AGP8X
Chipset : GeForce4 Ti 4200 with AGP8X
RAMDAC : Integrated RAMDAC
Video BIOS : Version 4.28.20.21.00
VGA Compatible : No
Total Memory : 64MB (63MB Video)
Texture Memory : 95MB
AGP Capabilities
Version : 3.00
Command Queue Length : 32
Fast-Writes Enabled : No
Fast-Writes Support : Yes
Isochronous Mode Enabled : No
Addressing Enabled : 32-bit
Data Transfer Modes Support : 4x 8x
Current Data Transfer Rate
Video BIOS
Date : 11/28/02
Version : 4.28.20.21.00
Current Video Mode
Mode : 1280x1024 16M+ TrueColour (32-bit)
Current Refresh Rate : 72Hz
Virtual Desktop Size : 1280x1024
Video Driver
Model : nv4_mini.sys
Version : 6.14.10.4403
Expected Windows Version : 4.00
Video Acceleration : Yes
Screen Saver Active : No
Low Power Saving Active : 20 minutes(s)
Power Off Saving Active : 20 minutes(s)
Enhanced Video Settings
Animation Effects Enabled : Yes
Full Windows Drag Enabled : Yes
Font Smoothing Enabled : No
HighContrast Feature On : No
Device Mode Characteristics
Physical Medium Width : 330 mm, 13 in
Physical Medium Height : 250 mm, 10 in
Recommended CRT/Panel Size : 20 in
Horizontal/Vertical Resolution : 96x96 dpi
Colour Bits/Planes : 32 / 1 bit(s) pp
Brushes : 4294967295
Pens : 4294967295
Colours/Shades : 4294967295
Pixel Width/Height/Diagonal : 36 / 36 / 51
Driver Clipping Capabilities
Can Clip Output to Rectangle : Yes
Can Clip Output to Region : No
Driver Raster Capabilities
Supports Banding : No
Supports Fonts Larger than 64Kb : Yes
Can Transfer Bitmaps : Yes
Supports Bitmaps Larger than 64Kb : Yes
Supports Device Bitmaps : No
Supports DIBs : Yes
DIBs on Device Surface : Yes
Flood Fills : Yes
Supports Windows 2.x : Yes
Stretch/Compress Bitmaps : Yes
Stretch/Compress DIBs : Yes
Supports Scaling : No
Palette-Based Device : No
Saves Bitmap Locally : No
Driver Curve Capabilities
Can Draw Circles : Yes
Can Draw Ellipses : Yes
Can Draw Pie Wedges : Yes
Can Draw Chord Arcs : Yes
Can Draw Wide Borders : Yes
Can Draw Styled Borders : Yes
Can Draw Wide, Styled Borders : Yes
Can Draw Rounded Rectangles : Yes
Can Draw Interiors : Yes
Driver Line Capabilities
Can Draw Polylines : Yes
Can Draw Styled Lines : Yes
Can Draw Wide Lines : Yes
Can Draw Wide, Styled Lines : Yes
Can Draw Markers : Yes
Can Draw Polymarkers : Yes
Can Draw Interiors : Yes
Driver Polygonal Capabilities
Can Draw Alternate-fill Polygons : Yes
Can Draw Winding-fill Polygons : Yes
Can Draw Rectangles : Yes
Can Draw Scan Lines : Yes
Can Draw Wide Borders : Yes
Can Draw Styled Borders : Yes
Can Draw Wide, Styled Borders : Yes
Can Draw Interiors : Yes
Driver Text Capabilities
Supports Stroke Clip Precision : Yes
Supports Stroke Output Precision : Yes
Supports Character Output Precision : Yes
Supports 90° Character Rotation : No
Supports Any Angle Character Rotation : No
Supports Independent X-Y Scaling : No
Supports Doubled Character for Scaling : No
Supports Integer Multiples for Scaling : No
Any Multiples for Exact Scaling : No
Can Draw Double-Weighted Characters : No
Can Italicise : No
Can Underline : Yes
Can Draw Strikeouts : Yes
Can Draw Raster Fonts : Yes
Can Draw Vector Fonts : Yes
Cannot Scroll Using BitBlt : No
Performance Tips
Tip 2221 : Driver is not certified.
Tip 319 : A refresh rate of at least 75Hz is recommended. Increase it if possible.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.
Although I enabled agp 8x support from bios 3dmark03 system details says: "support 4x and 8x, 4x enabled"
I upgraded the bios with the latest ("leadtek uk" advised so but didn't help).
I can't figure out the problem, can anybody help?
System and driver details:
SiSoftware Sandra
Processor
Model : AMD Athlon(tm) XP 2400+
Speed : 2.01GHz
Model Number : 2400 (estimated)
Performance Rating : PR2920 (estimated)
Type : Standard
L2 On-board Cache : 256kB ECC Synchronous Write-Back
Mainboard
Bus(es) : ISA AGP PCI USB FireWire/1394 i2c/SMBus
MP Support : No
MP APIC : No
System BIOS : Phoenix Technologies, LTD 6.00 PG
Mainboard : nVidia-nForce
Total Memory : 255MB
Chipset 1
Model : Nvidia Corp nForce2 AGP Controller
Front Side Bus Speed : 2x 168MHz (336MHz data rate)
Video System
Monitor/Panel : FLATRON 795FT PLUS/SUPER
Adapter : NVIDIA GeForce4 Ti 4200 with AGP8X [NV28.2]
Adapter : NVIDIA GeForce4 Ti 4200 with AGP8X
Operating System(s)
Windows System : Microsoft Windows XP Professional Version 5.01.2600
SiSoftware Sandra
Video Adapter
Model : NVIDIA GeForce4 Ti 4200 with AGP8X
Chipset : GeForce4 Ti 4200 with AGP8X
RAMDAC : Integrated RAMDAC
Video BIOS : Version 4.28.20.21.00
VGA Compatible : No
Total Memory : 64MB (63MB Video)
Texture Memory : 95MB
AGP Capabilities
Version : 3.00
Command Queue Length : 32
Fast-Writes Enabled : No
Fast-Writes Support : Yes
Isochronous Mode Enabled : No
Addressing Enabled : 32-bit
Data Transfer Modes Support : 4x 8x
Current Data Transfer Rate
Video BIOS
Date : 11/28/02
Version : 4.28.20.21.00
Current Video Mode
Mode : 1280x1024 16M+ TrueColour (32-bit)
Current Refresh Rate : 72Hz
Virtual Desktop Size : 1280x1024
Video Driver
Model : nv4_mini.sys
Version : 6.14.10.4403
Expected Windows Version : 4.00
Video Acceleration : Yes
Screen Saver Active : No
Low Power Saving Active : 20 minutes(s)
Power Off Saving Active : 20 minutes(s)
Enhanced Video Settings
Animation Effects Enabled : Yes
Full Windows Drag Enabled : Yes
Font Smoothing Enabled : No
HighContrast Feature On : No
Device Mode Characteristics
Physical Medium Width : 330 mm, 13 in
Physical Medium Height : 250 mm, 10 in
Recommended CRT/Panel Size : 20 in
Horizontal/Vertical Resolution : 96x96 dpi
Colour Bits/Planes : 32 / 1 bit(s) pp
Brushes : 4294967295
Pens : 4294967295
Colours/Shades : 4294967295
Pixel Width/Height/Diagonal : 36 / 36 / 51
Driver Clipping Capabilities
Can Clip Output to Rectangle : Yes
Can Clip Output to Region : No
Driver Raster Capabilities
Supports Banding : No
Supports Fonts Larger than 64Kb : Yes
Can Transfer Bitmaps : Yes
Supports Bitmaps Larger than 64Kb : Yes
Supports Device Bitmaps : No
Supports DIBs : Yes
DIBs on Device Surface : Yes
Flood Fills : Yes
Supports Windows 2.x : Yes
Stretch/Compress Bitmaps : Yes
Stretch/Compress DIBs : Yes
Supports Scaling : No
Palette-Based Device : No
Saves Bitmap Locally : No
Driver Curve Capabilities
Can Draw Circles : Yes
Can Draw Ellipses : Yes
Can Draw Pie Wedges : Yes
Can Draw Chord Arcs : Yes
Can Draw Wide Borders : Yes
Can Draw Styled Borders : Yes
Can Draw Wide, Styled Borders : Yes
Can Draw Rounded Rectangles : Yes
Can Draw Interiors : Yes
Driver Line Capabilities
Can Draw Polylines : Yes
Can Draw Styled Lines : Yes
Can Draw Wide Lines : Yes
Can Draw Wide, Styled Lines : Yes
Can Draw Markers : Yes
Can Draw Polymarkers : Yes
Can Draw Interiors : Yes
Driver Polygonal Capabilities
Can Draw Alternate-fill Polygons : Yes
Can Draw Winding-fill Polygons : Yes
Can Draw Rectangles : Yes
Can Draw Scan Lines : Yes
Can Draw Wide Borders : Yes
Can Draw Styled Borders : Yes
Can Draw Wide, Styled Borders : Yes
Can Draw Interiors : Yes
Driver Text Capabilities
Supports Stroke Clip Precision : Yes
Supports Stroke Output Precision : Yes
Supports Character Output Precision : Yes
Supports 90° Character Rotation : No
Supports Any Angle Character Rotation : No
Supports Independent X-Y Scaling : No
Supports Doubled Character for Scaling : No
Supports Integer Multiples for Scaling : No
Any Multiples for Exact Scaling : No
Can Draw Double-Weighted Characters : No
Can Italicise : No
Can Underline : Yes
Can Draw Strikeouts : Yes
Can Draw Raster Fonts : Yes
Can Draw Vector Fonts : Yes
Cannot Scroll Using BitBlt : No
Performance Tips
Tip 2221 : Driver is not certified.
Tip 319 : A refresh rate of at least 75Hz is recommended. Increase it if possible.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.
