Tech Support banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
I have a baby board..its a pc133 socket 370...M755 series.. I am trying to install a 64 mg nvidea gforce2 card in the pci slot...I dont have AGP..I have selected PCI in bios ..I have tried to disable in device manager and restart. in all cases, the monitor remains black and the monitor light returns to yellow...after a brief try at coming on green.any suggestions?? or do i need a new mobo?
 

·
hey
Joined
·
10,189 Posts
Try looking in the CMOS or there may be a jumper on the motherboard. If turning it off there don't work, it most likely is not accepting the video card for some reason.
 

·
Registered
Joined
·
4 Posts
Discussion Starter #3
danrak

thanks for your reply... I have checked CMOS ..nothing there....I have been told there may be jumpers that would do it...but...noone knows which jumpers...i tried one of the 3 that are on my board..it didnt work. I didnt want to expierment and screw something up. Nothing in my manuel about it. I called the tech support..they wouldnt give me any info. I bought it from Netseller as a bare bones unit....so I have to deal with them.
 
S

·
Guest
Joined
·
0 Posts
Well I have downloaded the manual for your board and I can't find anyway of disabling the video either.

SPEEDO
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top