Tech Support Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi,
Im using a riva TNT 2 32 MB display card on a ME O.S .
My RAM is 64 MB and whn i had fixed my card , i had abs no probs with Dx 8.0 loaded... But thn whn i loaded 8.1, i started exp. probs tht my videos wuld freeze so i upgraded my drivers and videos work perfectly fine but my games dont wrk whn i looked into the prob inside Dx, i found tht direct draw tested fine but my direct 3d caused the system to hang... when i test Direct 3D i get the followig error:
Direct3D 7 test results: Failure at step 8 (Creating 3D Device): HRESULT = 0x80004005 (Generic failure)
Direct3D 8 test results: Failure at step 8 (Creating 3D Device): HRESULT = 0x8876086c (error code)
Direct3D 9 test results: Failure at step 8 (Creating 3D Device): HRESULT = 0x8876086c (error code)
I have now loaded Dx 9.0 and 44.03 drivers but as bizzare as it may sound, my Direct 3D begins working at 9:00 pm every night and at morning the DIrect 3D is back to the error! ive seen this trend for 3 nights now! Is this some kind of a virus im sure windows doesnt need reinstallation if it does work every night...
Plz plz help me ive tried everything under the sun!
Thnx.
PS:this is my Dxdiag log:
------------------
System Information
------------------
Time of this report: 8/13/2003, 12:31:40
Machine name: ANMOL
Operating System: Windows Me (4.90, Build 3000)
Language: English (Regional Setting: English)
System Manufacturer: VIA Technologies, Inc.
System Model: VT82C692BX
BIOS: Award
Processor: Intel Pentium III, ~730MHz
Memory: 64MB RAM
Page File: 65MB used, 1918MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0 (4.09.0000.0900)
DX Setup Parameters: Not found
DxDiag Version: 4.09.0000.0900 32bit


---------------
Display Devices
---------------
Card name: NVIDIA RIVA TNT2 Model 64/Model 64 Pro
Manufacturer: NVIDIA
Chip type:
DAC type:
Device Key: Enum\PCI\VEN_10DE&DEV_002D&SUBSYS_00000000&REV_15\000800
Display Memory: 16.0 MB
Current Mode: 800 x 600 (16 bit)(optimal refresh rate)
Monitor: AcerView 34T
Monitor Max Res: 1024,768
Driver Name: nvdisp.drv
Driver Version: 4.14.0010.4403 (English)
DDI Version: 7
Driver Attributes: Final Retail
Driver Date/Size: 5/2/2003 15:19:00, 107296 bytes
WHQL Logo'd: n/a
WHQL Date Stamp: n/a
VDD: *vdd
Mini VDD: nvmini.vxd
Mini VDD Date: , 0 bytes
Device Identifier: {D7B71E3E-436D-11CF-8372-0A20B4C2C935}
Vendor ID: 0x10DE
Device ID: 0x002D
SubSys ID: 0x00000000
Revision ID: 0x0015
Revision ID: 0x0015
Video Accel: ModeMPEG2_A ModeMPEG2_B ModeMPEG2_C ModeMPEG2_D
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Failure at step 8 (Creating 3D Device): HRESULT = 0x80004005 (Generic failure)
D3D8 Test Result: Failure at step 8 (Creating 3D Device): HRESULT = 0x8876086c (error code)
D3D9 Test Result: Failure at step 8 (Creating 3D Device): HRESULT = 0x8876086c (error code)
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top