Tech Support Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I have the Creative Inspire t5400 series speakers, and although I have a different model, i experienced very similar symptoms to whats going on with the 6600. Finally, my speakers stopped powering on.

I disassembled the remote and cleaned the volume potentiometer, however, now the LED turns on all the time, and dims when the volume is turned up.

I should definitely mention that when i disassembled the remote, I also had to re-wire the connections. I may have them in incorrect order, which could certainly cause the issues I am having. Does anyone know the correct order of wiring in the remote? I currently have it set up (from left to right): Dark Green, Light Green, Thin Black, Yellow, White, Orange, Thick Black, Dark Blue.

If the wiring is not the issue, what would be the culprit? I am having trouble tracking down a replacement volume potentiometer, but I had planned on replacing the Q5 transistor and 6800 uF capacitor.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top