[Acer2000]

Hello,

I am trying to connect the case wires to the motherboard, and I'm having some difficulty. I've taken pictures and will appreciate it if you can point me in the right direction. Thank you

 

[Acer2000]

Picture 2

 

[Acer2000]

pictures 3-4

 

[Old Rich]

Acer support should have the manual for the motherboard with a schematic of the front panel connections

 

[Acer2000]

Hi,

Thank you for the advice. I was able to figure it out without the manual ... I bought the PC from ebay and I had to connect the wires. It's all good now.

I have an IDE DVD drive and a SATA drive, do I jumper the DVD as master or slave? Will appreciate your advice Yoda

 

[Old Rich]

If it is the only device on the ribbon, I would jumper the DVD either as Master or Cable Select ( CS)

 

[Acer2000]

Thank you

 

[Old Rich]

Yu are welcome . .