Tech Support Forum banner

Connec to different network

1025 Views 8 Replies 3 Participants Last post by  swormvn
Hi

I've two networks. (A: 192.168.2.x & B: 10.10.36.x). And I've a computer install windows XP professional, it's have two Network Card
Network Card A (connect to network A):
IP: 10.10.36.5
Netmask: 255.255.255.0
Gateway (GW): 10.10.36.6 (ADSL Modem use to connect internet)

Network Card B (connect to network B):
IP: 192.168.2.50
Netmask: 255.255.255.0
Gateway (GW): [leave it blank]

I don't know how to every computer in network A can access computer in network B and connect internet through this computer. I've search in google and file the guide below. I've done follow that but it's don't work

IP Forwarding - How to make Windows XP as a Router

So I don't know it's maybe have problem with static route. And I don't what have be done to do this.
Status
Not open for further replies.
1 - 9 of 9 Posts
post the results of a ipconfig /all for review
Thanks you for reply.
Below is my ipconfig /all

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Machine>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : home-afba0fbd6b
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : AMD PCNET Family PCI Ethernet Adapte
r
Physical Address. . . . . . . . . : 00-0C-29-4A-FF-99
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.10.36.5
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.10.36.6


Ethernet adapter Local Area Connection 1:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/100 VE Network Connection
Physical Address. . . . . . . . . : 00-19-D1-58-21-36
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.2.50
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
See less See more
Good. Now lets see one from a connected workstation.
Good. Now lets see one from a connected workstation.
Hi Wand3r3r
Thanks you for your reply.

All computer in network 192.168.2.x have static ip: 192.168.2.x, Subnet mark: 255.255.255.0 and I put the default gateway is 192.168.2.50.
All computer in network 192.168.2.x have static ip: 10.10.36.x, subnetmark: 255.255.255.0 and the default gateway is 10.10.36.5

I want computer in 192.168.2.x can access to computers in network 10.10.36.x and connect to the internet through computer 10.10.36.5.

So but a computer in network 192.168.2.x can only ping to the ip 10.10.36.5 (but can't access to this computer) can't ping to another computer in network 10.10.36.x (when ping it have reply request time out). So I don't know why and what to to to solve it
Do you have Internet connection sharing turned on?

I played around a bit a few years back, but I used network connections. Don't know how it's view in IPCONFIG. That may fix your problem.
swormvn I would suggest you undo the registry change concerning ip forwarding.

set the lan nic to obtain ip automatically.
engage ICS [internet connection sharing]
this should set the lan nic to 192.168.0.1. All lan connected pcs will get 192.168.0.x ips if set to obtain ip automatically.
Since your talking about port forwarding, I am assuming that you want to get into your network from the outside. I do not believe ICS allows this, at least I didn't find it when I was playing around with it. For that, you will need to download some software to do that. I believe the one I used was called Passport.

It's simple so easy to set up, but it's simple so all connections to the port will go to where you point, including outgoing connections.
@Wand3r3r: Thks for reply. I just want config static ip in computer in 192.168.2.x. Maybe I'll try to find out otherway to do this. Anyway thanks you so much.
@Xeneth: Thks Xeneth. Can you upload this software to some host like mediafire.com so I can try this software.
1 - 9 of 9 Posts
Status
Not open for further replies.
Top