Tech Support Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
My custom built computer has for seemingly no reason stopped powering up. I press the button and there's absolutely no response. My first thought was that there was something wrong with the outlet, no problem there. Then I tried a different compatible power cord, still nothing. By this time I decide to open her up and check the panel connectors. One of them seemed loose so I placed it back into position. Still nothing, now it is possible that when I re-attached the panel connectors they were not in the right place. But this seems unlikely, I'm going to look up the specific attachment points right now. But if anyone has another explanation I would love to hear it.

Thank you.
 

·
TSF - Enthusiast
Joined
·
15,298 Posts
Hello,

Please list the specs of the system (RAM,MB,HDD,etc)

Also list the brand/model of the PSU (including wattage)

Do you have another Power Supply you can test with the system
 

·
Premium Member
Joined
·
77,999 Posts
touch the 2 pins on the m/board the front button connects to with a small screwdriver and see if it boots
remove the 2 wires first
is the m/b light glowing
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top