Tech Support Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi, I have been having problems with one of my laptops. The one which I use is running Windows Vista and can connect to the router fine with no problems. The other is running windows xp and up until two weeks ago was connecting to the router fine as well.

Now when I go to view the network list the network that I want to connect to isn't there even though the other laptop is connecting to it. The router must be working fine otherwise both laptops wouldn't connect, the wireless card in the other laptop must be fine because it can still see my neighbours networks, it is just my network that it can't see or connect to.

Any ideas please?
 

·
Global Moderator
Electronic Design
Joined
·
52,099 Posts
Please supply the following info, exact make and models of the equipment please.

Name of your ISP (Internet Service Provider).
Make and exact model of the broadband modem.
Make and exact model and hardware version of the router (if a separate unit).
Model numbers can usually be obtained from the label on the device.
Connection type, wired or wireless.
If wireless, encryption used, (none, WEP, WPA, or WPA2)
Version and patch level of Windows on all affected machines, i.e. XP (Home or Pro), SP1-SP2-SP3, Vista (Home, Business, Ultimate), etc.
The Internet Browser in use, IE, Firefox, Opera, etc.




Please give an exact description of your problem symptoms, including the exact text of any error messages.



  • If you're using a wireless connection, have you tried a direct connection with a cable to see if that changes the symptoms?
  • For wireless issues, have you disabled all encryption on the router to see if you can connect that way?
  • Have you connected directly to the broadband modem to see if this is a router or modem/ISP issue?
  • If there are other computers on the same network, are they experiencing the same issue, or do they function normally?




On any affected computer, I'd also like to see this:

Hold the Windows key and press R, then type CMD (COMMAND for W98/WME) to open a command prompt:

Type the following commands on separate lines, following each one with the Enter key:

PING 206.190.60.37

PING yahoo.com

NBTSTAT -n

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top