Tech Support Forum banner
Status
Not open for further replies.
1 - 13 of 13 Posts

· Registered
Joined
·
60 Posts
Discussion Starter · #1 ·
so there is no display and it only has this backlight. it works fine on my tv screen when i connect to the tv through a vga cable.
i did not drop it or do anything, there is no physical damage to screen. im typing this on my tv connected to it.

so my question is, what is wrong with it and should i replace the screen??
can i do this myself, cos i heard u only need a screwdriver to replace the screen?
tried fn+f4 but did not work. someone suggested i go to bios setup and load to defaults, but i dunno how to do this exactly. i press f8 on startup, but the setup screen does not come up on my tv

please help, id rather do this myself than go to a repair shop!!
 

· Registered
Joined
·
60 Posts
Discussion Starter · #3 ·
well if you say it CAN be the inverter or blacklight, what else can it be. i can look for the parts, but r u sure thats whats wrong? tell me wut i need to do, ill do anything and let you know so you can come to an accurate conclusion about whats wrong. thanks a lot
 

· Registered
Joined
·
5,979 Posts
It's not easy to tell what the exact cause of the issue is. There's may some method of using a multimeter or similar test tool to diagnose the issue but it would still require disassembling the unit.

It's most likely the inverter or the back light. It's normally cheaper and easier to replace the the inverter but you need to make sure you get an exact replacement.
 

· Registered
Joined
·
60 Posts
Discussion Starter · #8 ·
i asked from a shop and they said it could likely be a graphics card or motherboard issue than an inverter issue.
and it will cost more for the motherboard and graphics card replacement.

wut do u think? i think i should buy an inverter and try that out myself first as it would be much cheaper that way.
 

· Registered
Joined
·
60 Posts
Discussion Starter · #11 ·
i must also add that when i connect my pc to the tv, the tv does not display the screen most the time when i toggle with Fn+F4(lcd screen) keys. it just flickers most of the time in the "PC VGA" mode...but sometimes it works fine on the tv. what does this say?
is there something wrong with the graphics card , gpu, or motherboard?
but once im able to get it on tv, it never flickers or faulters. so i dont know why it shows on tv sometimes, and other times it doesnt.

i tried shaking laptop but still does not show on tv most the time.

why could this be?
 

· Registered
Joined
·
1 Posts
I am a computer tech and I have one of those exact same laptops doing the exact same thing. I replaced the screen and the inverter, a couple of times as we have a bunch of these laptops. Still does not work. It appears to be a mainboard problem.
 

· Registered
Joined
·
60 Posts
Discussion Starter · #13 ·
so the fact is, it flickers when attempting to display on tv (just flashes, no display, just a light), but once it does get on tv it never flickers.
so there is some problem when toggling from pc to tv screen. i cant understand why
 
1 - 13 of 13 Posts
Status
Not open for further replies.
Top