Tech Support banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Whenever I turn on my computer, it will not start up. Everything on the outside seems to be OK, but I am not getting any output from the monitor. This all happened right after my computer crashed. I've checked just about everything, and nothing is working. Help please?? Thanks in advance!
 

·
Registered
Joined
·
1,154 Posts
hi hyper777777,

we need a bit more info on your problem. when you press the power button on, do you hear any fans spinning? what were you doing before the system crash?

since your computer wont post, turn off the computer and take out all of the computer components and only reseat the following devices:

power supply, motherboard, cpu, ram, and videocard.

if you have multiple sticks of ram, try booting the computer up with only one stick of ram at a time. also i recommend clearing the cmos on the motherboard as well. refer to your motherboard manual for the cmos location.

if you have a spare power supply, try installing that too and see if its a power problem and it could be, good luck.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top