Tech Support Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
hey
i bought on ebay ink cartages for my canon pixma ip 5200R
but the thing is that the cartages came with no chipset so if you install them the print wont read any cartages
so i removed the chip from the old ink cartage and installed it to the new ones
but now the printer keeps telling me that the ink cartage is empty because it thinks it is the same cartage
so is there a way to rest that chipset so that i works ?
 

·
Registered
Joined
·
98 Posts
Press the "Resume" (flashing) button on the printer for five seconds... The message should then disappear,
the error light on printer should stop flashing and the printer should work again...
If your printer doesn't have a "Resume" button, try using the "Stop/Reset" button, or the button that you would
normally use, to clear "out of paper" and similar errors.

The above procedure has to be repeated with each cartridge that goes empty (in software).
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top