Tech Support Forum banner
Status
Not open for further replies.
1 - 15 of 15 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
HI I HAVE HAD THE SAME PROBLEM SAME ROUTER, PLEASE CAN SOME ONE HELP ME, MY DETAILS ARE: HUAWEI ECHOLIFE HG520B


Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\Justin>IPCONFIG / ALL

Error: unrecognized or incomplete command line.

USAGE:
ipconfig [/allcompartments] [/? | /all |
/renew [adapter] | /release [adapter] |
/renew6 [adapter] | /release6 [adapter] |
/flushdns | /displaydns | /registerdns |
/showclassid adapter |
/setclassid adapter [classid] ]

where
adapter Connection name
(wildcard characters * and ? allowed, see examples)

Options:
/? Display this help message
/all Display full configuration information.
/allcompartments Display information for all compartments.
/release Release the IPv4 address for the specified adapter.
/release6 Release the IPv6 address for the specified adapter.
/renew Renew the IPv4 address for the specified adapter.
/renew6 Renew the IPv6 address for the specified adapter.
/flushdns Purges the DNS Resolver cache.
/registerdns Refreshes all DHCP leases and re-registers DNS names
/displaydns Display the contents of the DNS Resolver Cache.
/showclassid Displays all the dhcp class IDs allowed for adapter.
/setclassid Modifies the dhcp class id.

The default is to display only the IP address, subnet mask and
default gateway for each adapter bound to TCP/IP.

For Release and Renew, if no adapter name is specified, then the IP address
leases for all adapters bound to TCP/IP will be released or renewed.

For Setclassid, if no ClassId is specified, then the ClassId is removed.

Examples:
> ipconfig ... Show information
> ipconfig /all ... Show detailed information
> ipconfig /renew ... renew all adapters
> ipconfig /renew EL* ... renew any connection that has its
name starting with EL
> ipconfig /release *Con* ... release all matching connections,
eg. "Local Area Connection 1" or
"Local Area Connection 2"
> ipconfig /allcompartments ... Show information about all
compartments
> ipconfig /allcompartments /all ... Show detailed information about all
compartments

C:\Users\Justin>IPCONFIG /ALL

Windows IP Configuration

Host Name . . . . . . . . . . . . : Justin-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Bluetooth Network Connection 3:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
#3
Physical Address. . . . . . . . . : 00-25-56-EA-82-0D
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) WiFi Link 5100 AGN
Physical Address. . . . . . . . . : 00-1E-65-08-A7-DC
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::89a6:8005:c123:dd37%16(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.3(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.3
192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Marvell Yukon 88E8057 PCI-E Gigabit Ether
net Controller
Physical Address. . . . . . . . . : 00-13-77-E6-CA-D1
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 6:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 7:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.{85579154-D9AA-42B9-85C7-91E6E6271
6E1}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 14:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.{35E167BF-12F0-4D9F-8E0D-6AB958BEE
C12}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 15:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 02-00-54-55-4E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

C:\Users\Justin>




ROUTER DETAILS:

DHCP

DHCP ServerNoneRelay
Client IP Pool Starting Address 192.168.1.5
Size of Client IP Pool 250


PLEASE HELP!!
 

·
Registered
Joined
·
10 Posts
Discussion Starter · #3 ·
ok

i know how to portforward did it with old router, tried a million times with this router but it wont work, even got pfconfig program, it access's my router does what it says to do says its done and complete, but then when i see if utorrent or bitcomet has the port number i use forwaded it says there is an error.

i have shut all my firewalls etc down, tried many different combinations with router on nat, and dhp but no luck

please help!
 

·
Global Moderator
Electronic Design
Joined
·
52,366 Posts
Post a screen shot of the port forwarding configuration screens for your router and also an IPCONFIG /ALL from the machine you're trying to port forward to.


To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file. To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here.
 

·
Global Moderator
Electronic Design
Joined
·
52,366 Posts
A couple of things.

You should cut down the size of the DHCP address pool to maybe 100 at most, you are currently using all the available address ranges.

Port forwarding is done with local addresses, not the public IP address. You should have a static IP address OUTSIDE the range of the DHCP server, but in the same subnet for the machine that requires the forwarded port.
 

·
Registered
Joined
·
10 Posts
Discussion Starter · #13 ·
--------------------------------------------------------------------------------

A couple of things.

You should cut down the size of the DHCP address pool to maybe 100 at most, you are
currently using all the available address ranges.

Port forwarding is done with local addresses, not the public IP address. You should have a static IP address OUTSIDE the range of the DHCP server, but in the same subnet for the machine that requires the forwarded port.




thanks for the reply, i understand the cutting down dhcp size but how do i set up a static ip OUTSIDE the range of dhcp server i dont understand this, how do i find it?

but in the same subnet as machine which requires port? i dont understand this either

thanks
 

·
Global Moderator
Electronic Design
Joined
·
52,366 Posts
If you change the DHCP pool to 192.168.1.2 for 100 entries, for example, then you can assign static IP addresses starting past 192.168.1.102 and they'll be outside the range of the DHCP address pool, but in the same subnet.

The subnet for this 255.255.255.0 subnet mask is 192.168.1.1 through 192.168.1.255. x.x.x.1 is the router address, and x.x.x.255 is the broadcast address. The addresses in between are ones that you can use.
 

·
Registered
Joined
·
10 Posts
Discussion Starter · #15 ·
sorry this is all a bit confusing,

what do i need to put in dhcp bit

in the nat bit

and any properties changes on the manage network connections bit?

thanks for the help rly appreciate it
 
1 - 15 of 15 Posts
Status
Not open for further replies.
Top