[Rkjohn]

Hello Folks,

I have query of campus network with Firewall.

Network Diagram

ISP>>>Firewall1-------
\ | >>>>>>>>>>>Mikrotik Router->>>AP<<<WifiUser
\ Firewall2-------------

ISP is connected with Both the Firewall and 2 LAN cable connected to Mikrotik Router coming from Firewall1 and Firewall2 and AP is connected with Mikrotik

Now users are trying to connect AP and they are getting the internet from Firewall1.

My requirement is to divide the traffic between Firewall1 and firewall2

Please help. What should I do

 

[GentleArrow]

"My requirement is to divide the traffic between Firewall1 and firewall2"

Ideally that would require a second internet connection. It's rather pointless to have both use the same internet connection.

 

[Rkjohn]

I have 2 internet connection as well.

But by default the authentication of firewall1 is appearing to all the wifi users and I want that student should get the authentication from firewall2 and staff from firewall1.

You can share your email ID so that I can mail the diagram.

Thank you.

 

[spunk.funk]

Here are instructions on how to attach a picture in your thread:

Go into the TSF thread where you are seeking help and follow this procedure:
In the Message box > Advanced. another screen will open…write your message > select the Paper Clip.
(shown in the illustration).

Fig. 5
A pop-up screen will appear. Click on Browse then navigate to the pic you want to upload. Click on the Image file (ie) .jpg then click Upload to upload it to TSF.
Once it’s uploaded, close the pop-up screen and click the Paper Clip again. Then click on the Attachment . This will place the pic in your message so it can be viewed.

 

[Rkjohn]

The diagram is attached herewith.

Please help

 

[spunk.funk]

You need a separate router for each firewall.