Tech Support Forum banner
Not open for further replies.
1 - 4 of 4 Posts

· Registered
97 Posts
Discussion Starter · #1 ·
after taking ages to install the drivers successfully i cant use the router to connect to the net. all the lights are green on the router. i set up a connection with windows but when i try to connect using this it just says no dial tone. its installed correctly and user names are correct so i dont know whats wrong.

ive never liked routers

· Global Moderator
Electronic Design
52,687 Posts
First off, there are no drivers required, except if you happen to be using USB to connect. I STRONGLY recommend you use Ethernet connections for networking.

Please supply the following info, exact make and models of the equipment please.

Make and model of the broadband modem.
Make and model of the router.
Connection type, wired or wireless.
If wireless, encryption used, (none, WEP, WPA, or WPA2)
Make/model of your computer.
Version and patch level of Windows on all affected machines, i.e. XP-Home (or XP-Pro), SP2, Vista, etc.

Also, please give an exact description of your problem symptoms, including the exact text of any error messages.

On any problem computer, I'd also like to see this:

Start, Run, CMD to open a command prompt:

Type the following command:


Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
1 - 4 of 4 Posts
Not open for further replies.