[usasma]

This sounds like a hard drive problem.
1. BACKUP YOUR STUFF!!! If the hard drive fails completely it'll cost big $'s to recover the data!!!
2. Run different hard drive tests. If all continue to not recognize your hard drive, then it's likely that that is the problem. You can increase the reliability of the tests by only having 1 hard drive connected at a time (this way a bad hard drive won't affect the test on a good hard drive).

perfmon reports that your AMD High Definition Device is disabled. Is this deliberate? If so, why?

The attached memory dump is a Verifier Enabled Memory dump. First, please turn off Driver Verifier. To do this, open Driver Verifier. Then click on "Delete existing settings". Then click on "Finish". The reboot the system.

The memory dump points to a Windows driver. In most cases Windows drivers aren't at fault. So this leaves:
- 3rd party drivers
- hardware

3rd party drivers should have been caught by Driver Verifier also, so this leaves us with hardware as the probable cause. Hardware includes:
- hardware failure
- compatibility issues
- low-level driver problems
- malware

I see that AMD OverDrive is on your system. It's a possible cause of BSOD's, so please uninstall it. If overclocking, please remove the overclock and return the system to stock values to see if that restores stability.

In summary, I strongly suspect your hard drive. The ultimate test is to see if it has problems with a hard drive that has passed the diagnostics (that's why I recommended disconnecting all but one of the hard drives when testing).

BSOD BUGCHECK SUMMARY

[font=lucida console]
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\010912-28813-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Mon Jan  9 03:39:37.619 2012 (UTC - 5:00)
System Uptime: 0 days 0:46:29.790
Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )
BUGCHECK_STR:  0x4E_99
DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x4E_99_VRF_nt!MiBadShareCount+4c
Bugcheck code 0000004E
Arguments 00000000`00000099 00000000`000aebba 00000000`00000003 00000000`00098d91
BiosVersion = F9e
BiosReleaseDate = 07/06/2010
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  
  [/font]

 

[usasma]

Actually this solves the mystery of where this device is coming from.
Since it's from the new software, I'd have to suspect that disabling it should be enough (for now).

 

[usasma]

Please follow the directions here to set your system for Minidumps (much smaller than the MEMORY.DMP file): Set MiniDump

We're in a quandry here - do we believe Western Digital (the test passed) or do we believe the other tests (all of whom failed) and the results of the BSOD analysis? Do you have a spare hard drive that you can use to replace the current one?

 

[usasma]

This one looks like video (DirectX).
Are you overclocking?
Are you using an SSD?

Post here for PSU advice: RAM and Power Supply Support - Tech Support Forum
Include a link to this post so they can see what's going on.

You have a very old version of LogMeIn installed (remote control software). Please uninstall it immediately.

BSOD BUGCHECK SUMMARY

[font=lucida console]
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\011012-25428-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Tue Jan 10 08:05:05.386 2012 (UTC - 5:00)
System Uptime: 0 days 0:33:23.572
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::DestroyOneAllocation+2d8 )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0x3B
PROCESS_NAME:  bf3.exe
FAILURE_BUCKET_ID:  X64_0x3B_dxgmms1!VIDMM_GLOBAL::DestroyOneAllocation+2d8
Bugcheck code 0000003B
Arguments 00000000`c0000005 fffff800`03208007 fffff880`092f2a10 00000000`00000000
BiosVersion = F9e
BiosReleaseDate = 07/06/2010
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  
  [/font]