Tech Support Forum banner
Status
Not open for further replies.
1 - 6 of 6 Posts

· Registered
Joined
·
460 Posts
Discussion Starter · #1 ·
This is my current system:

MSI K9N Neo 3 AM2 Motherboard
AMD Athlon 4800+ x2 Dual Core AM2
4X 1GB OCZ Gold Ram 800mhz DDR2
Nvidia ASUS 8800GS 512mb GDDR3
2 x Sata Seagate 250GB Hard Drives
1 x DVD/RW ATA Drive
500w PSU with 12v1 20a rail and 12v2 20a rail.

Basically upgraded my graphics card from a 8600GT to a 8800GS and after a day or so i get BSOD on bootup just after the windows vista loading screen (32bit) with the following error code:

0xc00000005

I've gone into safe mode uninstalled the drivers and installed the lastest ones off the nvidia website no luck. I'll keep you updated if i get any luck.
 

· Registered
Joined
·
460 Posts
Discussion Starter · #2 ·
Sorry a correction my psu is 18a on 1 rail and 17a on the other. Although i have just disconnected one of my sata drives and no error or so far anyway? Do you think the power supply can't cope?
 

· Registered
Joined
·
141 Posts
well i dont think artic power is a good psu so, it could be the problem.
 

· Registered
Joined
·
460 Posts
Discussion Starter · #5 ·
Ok thanks the PSU was a quick fix for now, was looking at a 650 corsair or OCZ Extreme power 700w. Both were around the same price.
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top