Tech Support Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
10 years old. 700 hours. Serviced well. Last malfunction fixed: failed regulator at 1 year old. Current problem. Fault code F3 during exercise. Now I can’t set exercise because fault code interferes. I can manual start. i Just created a simulated power failure. Main power off. 10 second pause and generator started as programmed. Mandatory warmup. Power came back on. Gen running now 15 mins and no F3 fault. Battery tests at 13+ volts while running. 12.4 volts before starting. Could it be the panel?
Any thoughts will be appreciated.
 
1 - 1 of 1 Posts
Top