Tech Support Forum banner

Boot issues/motherboard?

663 Views 5 Replies 2 Participants Last post by  Doby
I just installed a new E2200 Dual core 2.2ghz onto my board and installed windows, windows works fine and all its just turning on the computer the screen comes on black and I constantly have to push the reset button. After about 3-5 pushes it boots fine.

I'm running;

Intel Dual Core E2200 2.2GHz
4GB DDR2 667
ASRock 4CoreDual-SATA2 R2.0 Motherboard
Antec 650 Watt PSU
EVGA GeForce 9800 GT 512MB Superclocked
2 22x DVDRW (One is SATA connection)
D-Link Gigabit Ethernet PCI card
Creative Sound Blaster SE
AND 3 Case fans/1 PCI slot fan

Any thoughts?
Not open for further replies.
1 - 3 of 6 Posts
the setup was the same as before, I only swapped out the cpu and put on an arctic cooling freezer 7 pro fan. That and dropped my old dvd rom for a sony sata dvd rw.

Oh and this time around I plugged my front side audio in, it wasn't hooked up before but I doubt that'll do it...
alright I'll give that a shot ^^
It does allow me to use the 3.5 of the 4 with windows though, Might also be why in the past the start up took a while anyways.
1 - 3 of 6 Posts
Not open for further replies.