Tech Support banner
Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I have a Tyan Thunder K8W (S2885), Dual opteron 246's with 2GB Corsair ECC ram. System hangs during boot. A black screen with 00A1 appears in the lower right corner. I have never encountered a problem like this. I am going to start removing hardware and troubleshoot as much as I can. Any help or ideas is welcome. Thanks.
 

·
Tech Guy/Gentoo User
Joined
·
659 Posts
What make PSU do you have?
 

·
Tech Guy/Gentoo User
Joined
·
659 Posts
It might be a RAM problem.. Try running Memtest from a Linux boot disc (I use Gentoo) How long have you been getting this problem?
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #5 ·
Started two days ago. System would hang, no video signal or input could be detected. How long would you suggest running memtest?
 

·
Tech Guy/Gentoo User
Joined
·
659 Posts
Overnight, and for each stick separately. Should see if you have any problems with it.
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top