Tech Support banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Banned
Joined
·
39 Posts
Discussion Starter · #1 ·
:4-dontkno This is a custom made PC. While turning on computer and during loadup the Blue Screen Stop Error Code 0x000000D1 (0x7756BE9, 0x00000002, 0x00000000, 0x7756FBE9) appeared. Is there a fix to this stop error code? Thank you so much for allowing me to post. Windows XP Professional Service Pack 2 (build 2600)
VIA Technologies, Inc. VT82C692BX
867 megahertz Intel Pentium III
32 kilobyte primary memory cache
256 kilobyte secondary memory cache
122.94 Gigabytes Usable Hard Drive Capacity
114.00 Gigabytes Hard Drive Free Space
HITACHI GD-2000 [CD-ROM drive]
3.5" format removeable media [Floppy drive]
Maxtor 6L120P0 [Hard drive] (122.94 GB)
Standard floppy disk controller
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller]
VIA Bus Master IDE Controller
Adaptec AIC-7850 PCI SCSI Controller
VIA Rev 5 or later USB Universal Host Controller
U.S. Robotics 56K FAX INT PnP [Modem]
NETGEAR FA311 Fast Ethernet Adapter RAS Async Adapter
Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
Logitech USB WheelMouse
USB Root Hub
Creative SB Live! Value (WDM)
Creative SBLive! Gameport
Creative Sound Blaster AudioPCI (WDM)
Game Port for Creative
Rage Fury (Microsoft Corporation) [Display adapter]
KDS ions VS-7i [Monitor] (15.2"vis, s/n AAA39014651, September 2000)
hp deskjet 840c series
c: (NTFS on drive 0) 122.94 GB 114.00 GB free
288 Megabytes Installed Memory

Slot 'BANK_0' has 64 MB
Slot 'BANK_1' has 64 MB
Slot 'BANK_2' has 128 MB
Slot 'BANK_3' has 32 MB
Board: 693-596B-977
Bus Clock: 133 megahertz
BIOS: Award Software International, Inc. 4.51 PG 05/15/00
VIA Technologies, Inc. VT82C692BX

:4-dontkno
 

·
Enthusiast
Joined
·
4,527 Posts
Is the error not accompanied by some descriptive text in block caps such as : DRIVER_IRQL_NOT_LESS_OR_EQUAL ? (that line means it's a device driver issue, (bad or incompatible driver). If the system boots into safe-mode Windows without the error, it's almost certainly a driver conflict or simply a bad driver, since in safe mode only a bare minimum set of drivers are loaded, and they are all certified microsoft ones.

But the descriptive text in block caps which I referred to is just as vital as the error code itself in determining the cause.

If the error code appears during booting up it could be an indication of faulty or mis-matched RAM modules, so if you have more than one stick installed, remove them all except one, restart and see what happens. If error persists, remove that stick and replace with a different one until you've tried them all.
 

·
Roaming To Help
Joined
·
5,667 Posts
Firstly, can you provide us with a more accurate reading of everything on the screen please. i.e look for a mention of xxxx.sys especially.

Yet it could be anything. We also need the minudump for this.
 

·
TSF Team Emeritus, Articles Team
Joined
·
8,123 Posts
If the error code appears during booting up it could be an indication of faulty or mis-matched RAM modules, so if you have more than one stick installed, remove them all except one, restart and see what happens. If error persists, remove that stick and replace with a different one until you've tried them all.
Since the RAM modules installed are 32MB, 64MB and 128MB, restarting XP in single-stick configurations are IMHO impossible. Instead of this, and in order to check out your Memory, please download and run the Windows Memory Diagnostic in accordance with its instructions.

And, pip22 got the text of 0xD1 right; it is DRIVER_IRQL_NOT_LESS_OR_EQUAL
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top