For some reason it won't debug properly on my computer, so I'll give you the steps to debug yourself. This will essentially determine if the stop error is caused by the hardware or software (such as drivers).
1. Download and install the Microsoft Debugging Tools found here:
http://www.microsoft.com/whdc/devtoo...nstallx86.mspx .
2. Once downloaded and installed, go to start > all programs > Debugging Tools For Windows > WinDbg. Once you open WinDbg, you will presented with a blank screen.
3. Click on File > Symbol File Path. Here you will enter the symbols path, which is:
SRV*c:\symbols*
http://msdl.microsoft.com/download/symbols
4. Click Ok, then go File > Save Workspace.
5. Now go to File > Open Crash Dump and select the minidump file.
You will get a message to save base workspace information. Choose no.
6. Now you will get a debugging screen. It takes a little bit to run it, as the symbols have to be downloaded as they are needed. Then you will see information such as:
***This is just an example debug I got off the net***
Symbol search path is: SRV*c:\symbols*
http://msdl.microsoft.com/download/symbols
Microsoft (R) Windows Debugger Version 6.3.0017.0
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\WINDOWS\Minidump\Mini061904-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*
http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows XP Kernel Version 2600 (Service Pack 1) UP Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 2600.xpsp2.030422-1633
Kernel base = 0x804d4000 PsLoadedModuleList = 0x80543530
Debug session time: Sat Jun 19 19:06:57 2004
System Uptime: 0 days 1:03:36.951
Loading Kernel Symbols
....................................................................................................................................
Loading unloaded module list
..........
Loading User Symbols
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 86427532, {1db, 2, 3, b} <--This is your stop code
Unable to load image pavdrv51.sys, Win32 error 2
*** WARNING: Unable to verify timestamp for pavdrv51.sys
*** ERROR: Module load completed but symbols could not be loaded for pavdrv51.sys
Probably caused by : pavdrv51.sys ( pavdrv51+7fc0 )
Followup: MachineOwner
---------
Now, we can already see what it was most likely caused by, in this case it was
pavdrv51.sys, which is a Panda AV file.
If we want to get further in depth, we can use the command, !analyze -v at the kd> prompt to delve more info about the error:
kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Unknown bugcheck code (86427532)
Unknown bugcheck description <--Its unknown, and not listed on the MS KB at all.
Arguments:
Arg1: 000001db
Arg2: 00000002
Arg3: 00000003
Arg4: 0000000b
Debugging Details:
------------------
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID:
DRIVER_FAULT
BUGCHECK_STR: 0x86427532
LAST_CONTROL_TRANSFER: from f4198fc0 to 804f4103
STACK_TEXT:
f41f0964 f4198fc0 86427532 000001db 00000002 nt!KeBugCheckEx+0x19
WARNING: Stack unwind information not available. Following frames may be wrong.
f41f0ba0 f419920b 864db520 f419ccf0 00000000 pavdrv51+0x7fc0
f41f0c34 804ea221 865b8910 864a52c0 806ad190 pavdrv51+0x820b
f41f0c44 8055d0fe 864a5330 86305028 864a52c0 nt!IopfCallDriver+0x31
f41f0c58 8055de46 865b8910 864a52c0 86305028 nt!IopSynchronousServiceTail+0x5e
f41f0d00 80556cea 000000a4 00000000 00000000 nt!IopXxxControlFile+0x5c2
f41f0d34 8052d571 000000a4 00000000 00000000 nt!NtDeviceIoControlFile+0x28
f41f0d34 7ffe0304 000000a4 00000000 00000000 nt!KiSystemService+0xc4
00cdff70 00000000 00000000 00000000 00000000 SharedUserData!SystemCallStub+0x4
FOLLOWUP_IP:
pavdrv51+7fc0
f4198fc0 ?? ???
SYMBOL_STACK_INDEX: 1
FOLLOWUP_NAME: MachineOwner
SYMBOL_NAME: pavdrv51+7fc0
MODULE_NAME: pavdrv51
IMAGE_NAME: pavdrv51.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 3e8c072b
STACK_COMMAND: kb
BUCKET_ID: 0x86427532_pavdrv51+7fc0
Followup: MachineOwner
As you can see, it should point out the error.
If you need any more help with that debugger, let me know.
. I've disabled it, will reinstall and try it again.
