Tech Support banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
31 Posts
Discussion Starter · #1 ·
Overnight my computer shut down, and now, although there is a green light on the board, nothing happens when I hit the switch.

Does this sound firmiliar to anyone?

Mark
 

·
Premium Member
Joined
·
2,430 Posts
Hello, and welcome to the forum...It is possible that your psu has failed, or something else....I would suggest that you take the mobo out of the case, place it on a piece of cardboard, plug in the psu, cpu, one memory module and see if it will boot....then add components in succession....vid-card, etc and see what happens. If you post back your results, plese list all your components like you see in my sig, it will help us troubleshoot.
 

·
Registered
Joined
·
25,116 Posts
TWA has given you excellent advice / dotn forget you will need to jumper the pins normally occupied by the case switch / for this purpose I use a paperclip or small precision screwdriver


regards

joe
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top