Tech Support banner

Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
hi there.
I changed my system from a soltek 75 frn2-rl with a amd xp 2000 to the asus pc4800 with a p4 2.8. Currently it's running at 3.3ghz and maximum is 3.7 for me. But the problem isn't that. i'm running 2x120 sata disks in raid 0 config and why in the hell my lg 52x24x52 can't burn above 16x ?? in nero the buffer is allways going allmost till zero and clone cd can past 16x :( also my traxdata 24x10x40 writter can't past 16x !! I did install intel ich5r drivers and the raid acceleration software and no luck :( With my old system i could use the 2 writter at the same time AT full speed !! Anyideias ?? Ultra Dma is enabled is all cd(rw) drives. In xp my lg won't start in ultra dma mode but pio mode , in windows 2000 it starts in ultra dma mode. In hd tach i can only get average of 24mb/s i remember in the soltek board getting 38mb/s and i wasn't using raid 0 there ! Something is odd here !! will i have to go for another board ?? or go back to amd ?

Thanks

(ps: yes i'm using 52x media cds)
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top