Tech Support banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Hi..
What chipsets are good/bad and how can you see that ?
On my motherboard is the chipset i845E and on a nother
i845PE..?
whats the differences?
:rolleyes:
 

·
Registered
Joined
·
15 Posts
i845E

The 845E is based on the Brookdale core - the very same one that launched the SDRAM platform for the Pentium 4 almost a year ago. That fall, Intel officially approved DDR support for this chipset, even though the Brookdale had already supported the faster memory from its inception. The 845G is traveling along similar lines right now. While the chipset possesses the technology to work with DDR333 memory, Intel is taking its time in validating it, prompting many motherboard manufacturers to offer the feature as an overclocking option.

The only difference between the 845E and the original 845 is in their specifications, which now permit a quad-pumped 133 MHz FSB (ends up as 533 MHz). Intel has also combined the 845E with a new Southbridge, the ICH4 (i82801DB), which supports USB 2.0, but not UltraATA/133, since Intel had never advocated that standard in the first place. Instead, they just left it at ATA/100, assuming that ATA's advent at the end of the year would suffice. After all, everyone will be switching to the new standard as quickly as possible.

Another essential change has been made on the AGP front - the chipset only permits the use of AGP-4x graphics boards with a 1.5 V voltage supply. Just about every manual makes mention of this fact; however, only Jetway sees fit to put a sticker on the motherboard warning users that violating this guideline may damage their hardware.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top