Trying to find a command that will show the SFP (gbic) configuration. We have several varient of this switch with different configurations of 100 and 1000 speed media modules...we also stack these units (normally with another 6850 U24X and a copper 48 port 6850.
Tried the configuation command and it shows what each port is "capable" of but we need a fairly rapid method to verify all SFP are installed into the correct port/switch.
Tried the configuation command and it shows what each port is "capable" of but we need a fairly rapid method to verify all SFP are installed into the correct port/switch.
