Tech Support Forum banner
Status
Not open for further replies.
1 - 5 of 5 Posts

· Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Hi all,

I've been running an A8V Deluxe with two 1GB OCZ Platinum DDR 400 sticks for a year or so. Here is a link to the part on newegg http://www.newegg.com/Product/Product.asp?Item=N82E16820227210.

So I picked up a couple more sticks and put them in the machine and it won't boot or even let me get to the bios setup. It gives the following error info...

USB Device Over Current Status Dectected !!
System Will Shut Down After 15 Seconds.

No options. It won't go into BIOS setup. Nothing.

My first step was to take all the RAM out and boot up with only the new RAM in the first and second slots. Presto Magico! No problem. In my mind that rules out bad RAM but if someone knows better please pipe in.

So I did some searching and I've bumped into this in a couple of locations on the net but no definitive solution. Has anyone run into this problem and been able to solve it.

Thanks a bunch,



Jeff
 

· Registered
Joined
·
13,874 Posts

· Registered
Joined
·
5 Posts
Discussion Starter · #3 ·
Matt,

Thanks a bunch for the reply. I was able to get things working by explicitly setting the timings for my RAM. I'm sure that seems obvious to anyone with a strong hardware background, but I'm kind of new to building my own boxes and I just made the dumb assumption that the best setting would be auto and let the board figure things out.

Sorry to waste your time with the dumb question.


Jeff
 

· Registered
Joined
·
13,874 Posts
Glad you got it working. It wasn't a dumb question, don't worry. Thanks for posting the solution.

BTW, what did you set the timings to? You should be able to put them on 2-3-2-5 and have it work.
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top