Tech Support banner

Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
i just bought this was a 2250 chip and i cant get it to get at that speed in the bios it allows me to pick that speed but it wont boot and it says i need 2700 ram which is 333mhz but i got kingston ram 2700 333mhz ram and i am haveing this problem how can i fix it i have 2 sticks of 256 ddr333 chips. also whats the vcore when i was messing with it and put it up to 1.75 it would work at 2.05 but i dont know anything about that stuff can someone elaborate on that. also i have a old box and i connected my power switch on this mobo and when ever i shut down it will restart and not turn off i have a power switch and a reset switch and when i connected the pins it turns on fine but to turn it off i have to pull the plug and by holding the power button for 8 seconds the pc will shut dont then boot right back up 2 secs later any help on any of this. thanks
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top