[Derygo0043]

Hello, i just builded my first pc, i followed all instructions but when i finnished and turned on it started beeping, first i get 1 beep, then after like 20 sec 1 long and 3short beeps. And monitor doesnt even turn on. What should i do? I tryed restarting power, taking battary out for 5-10 mins, reinstalling rams and even rebuilding all parts again. (I dont have gpu(or i think its called pci)) And all parts r moveing or rgb and it looks like everything should work.

 

[oscer1]

Hi follow this How to Bench Test, Build, and Troubleshoot Your Computer | Tech Support Forum also list the hardware in computer

 

[Derygo0043]

Hi follow this How to Bench Test, Build, and Troubleshoot Your Computer | Tech Support Forum also list the hardware in computer

Motherboard: asus prime b450m-a; ram: hyperx 16gb; processor: amd ryzen 3 1200; m.2 ssd: xpg spetrix s40g; power block: AeroCool integration mod xt 750w.

 

[oscer1]

Look in motherboard manual for beep code I think going to be graphics. Do the bench test

 

[Derygo0043]

Look in motherboard manual for beep code I think going to be gpu

I dont have gpu

 

[oscer1]

I dont have gpu

Yeah I see that after I posted. Follow the bench test then report back before putting back in the case.

 

[Derygo0043]

Yeah I see that after I posted. Follow the bench test then report back before putting back in the case.

How to do bench test

 

[oscer1]

you need to follow what is posted in the link. take everything out of case just put motherboard on the cardboard box motherboard came in then put a stick of ram in slot motherboard manual says for 1 stick and install your cpu and cooler. hook power supply to motherboard. plug in monitor then short out the two pins that for the power button goes to motherboard to start it you should get a screen.

 

[Derygo0043]

you need to follow what is posted in the link. take everything out of case just put motherboard on the cardboard box motherboard came in then put a stick of ram in slot motherboard manual says for 1 stick and install your cpu and cooler. hook power supply to motherboard. plug in monitor then short out the two pins that for the power button goes to motherboard to start it you should get a screen.

Didnt work out. Well tomorrow i will just bring all pc to shop where i bought parts from.

 

[oscer1]

Ok sounds good

 

[Maco88]

beeps codes from my experience relate more to RAM & CPU's than other components. You may have a bad stick of RAM, which you could have tried testing one DIMM at a time.