This is a discussion on Canon Pixma within the Windows XP Support forums, part of the Tech Support Forum category. My Canon Pixma IP4200 is flashing the light on the resume button 5 times. I hve tried resetting, switching off,
Press theResume button when the button is blinking. If that fails, unplug the USB cable and the power cable from the computer end. Wait a few seconds and plug the power cable in. Wait a minute and plug the USb cable in.
Canon Pixma MX870 Just bought the all-in-one Canon MX870 printer and it seems that every single photo with people in it is printing with red skin tones. The same pictures printed on any other printer, including a Canon Pixma IP2600, are all normal skin tone and match the photos as they appear on the monitor. Doesn't...
05-18-2011 10:42 AM
Canon Pixma ip4300 - black ink cartridge not printing Hi all,
For some reason, the large black ink cartridge (PGI-5) used for printing black text on my Canon Pixma ip4300 printer has stopped working. Everything else seems to be fine.
There are 2 things to note, which may have some relevance to this:
1) I have recently swapped the printer over...
05-17-2011 03:10 AM
Canon Pixma MP495 new port could not be created. :0000 enviroment:
i have configured the printer(mp495) using the handbook step by step via my laptop (win7-x64). (just for info: i have an buffalo whr-g300 wlan-router). no problems to report - all works normal.
then i tried to install the already configured printer on mư desktop (win-xp-32bit incl....
04-25-2011 05:03 AM
Recommended wireless print server for my Canon Pixma MP280 Hi guys!
I would like to connect my all-in-one-printer Canon Pixma MP280 to my wireless B/G network at home.
Which wireless print server can you please recommend that surely works in two-ways with this Canon Pixma MP280 printer, i.e. not only printing but also scanning over the wireless...