How to Setup a D-Link Router

March 11, 2012 at 3:48 am by

17,955 Total Views

In this Tutorial we will be using a D-Link DIR 655 wireless router connected to a Charter Communications Cable Modem. We will not be using the D-Link installation CD, but will instead manually configure the router.

To begin, connect a patch network cable between the Modem’s port and the Router’s WAN or Internet Port. Connect a patch network cable from one of the router’s LAN or Ethernet Ports to each device that will use a wired connection. Keep an eye on the Modem and Router’s lights until they are stabilized.

From a computer wired directly to the router, open up your favorite browser and type in Type the Default User Name ofadmin and the Password is blank.
Note: You may have to do a Power Cycle if you’re unable to access the router’s configuration page.

Fig. 1

In the Tools Tab, change the Admin Password right away and do not use the default D-Link Admin Password for security reason.

Fig. 2

In the Setup Tab you may either select the Internet Connection Setup Wizard or Manual Internet Connection.

Fig. 3

In this Tutorial we will select the Manual Internet Connection option. In the Internet Connection Type we will use Dynamic IP (DHCP).

Fig. 4

To configure the Wireless Security – Click on the Setup Tab, then Wireless Settings Tab. In here, you may choose to manually setup your wireless network or use the a Wi-Fi Protected Setup (WPS). Let’s choose the Manual Wireless Connection Setup.

Fig. 5

Click on the Manual Wireless Network Setup, type your SSID (wireless network name). Make sure that you do not use your router’s name (default SSID). You may leave the Mode to the default which is the Mixed Mode. You may change this later on if you’re having any wireless issues. Save the setting after the changes.

Fig. 6

In the Wireless Security Mode, it is recommended to use WPA2. If some of your wireless devices don’t support this mode, feel free to change it but please do not use WEP Security (not unless some of your wireless devices won’t connect to WPA2) as it is equivalent to no Security at all. We will choose WP2 TKIP and AES and type in a complex password, but easy for you to remember. Save the setting after the changes.

Fig. 7

Take advantage of the great features in your D-Link router such as Quality of Service (QoS), Port forwarding and Guest Zone. The Guest Zone is a useful feature of the D-Link DIR 655 and not all routers have this type of option. If you enable this feature, you may create a separate SSID (or wireless network) other than your own SSID for Guests use only and have them connect to a separate SSID to isolate your Guests from your own wireless network for security reasons.

Fig. 8

To setup Port Forwarding, go to Advanced Tab, then Port Forwarding Tab. Make sure that you have all the Port Numbers handy for the Applications that you need to be port forwarded. Add the Application Name, TCP & UDP Ports Numbers and Schedule. Save the setting after the changes.

Fig. 9

Mac Cloning – You will need to setup Mac Cloning from Dynamic IP (DHCP) Internet Type section and click on Clone Your PCs MAC Address if your ISP didn’t provide you with your IP information. If you are not sure about this you may contact your ISP.
You don’t have to do anything at this point if it’s not needed.

Fig. 10

We have just concluded setting up a D-Link DIR 655 Router. Feel free to take advantage of the Support Menu just in case that you have any concerns regarding your router setting. It is located in the Support Tab. This contains useful information that may help you troubleshoot your issue.

Fig. 11

Finally, you may now connect all your wireless computers and devices (smart phones, printer, gaming console, etc.). Make sure to type in the correct pass-phrase to ensure successful wireless connectivity. If you encounter any disconnection issues on your wired and wireless network devices, you may wish to do a Power Cycle.

© 2012 2xg

Filed under Networking
Tagged , , , , , .